COLD ROAD MARKING PAINT
DEFINITION
> Synthetic resin-based, solvent-based, high performance matt cold road marking paint that does not change color.
AREA OF USE
> It is used in all kinds of traffic lines and markings required on road surfaces.
> It has high adhesion strength and dries quickly.
> It is resistant to abrasion.
> It has a matte appearance.
> It has high coverage and whiteness.
> White and yellow standard colors are available.
TECHNICIAL SPECIFICATIONS
Brightness |
Bright |
Solids by Volume |
75+/-2 |
Solids by Weight |
65-75+/-2 |
Density(g/cm3) |
1.5+/-0.02 |
Theoretical Coverage |
0.50-1kg/m2 |
Powder Drying |
5(20°C/min) |
Touch Dry |
30-45 (20°C/minute) |
Full Curing |
4(20°C/day) |
Application Thinner |
synthetic thinner |
Mixture Life |
12 hours |
SURFACE PREPARATION
> The surface must be thoroughly cleaned of dust, oil and other impurities.
> The surface must not be wet or damp.
> Application should be made in conditions where the ambient temperature is between 15-30°C.
> In applications with a roller or brush, 2 coats of paint are applied.
> In airbrush application, it can be applied as a double coat under normal conditions, and as a single coat at 60-70°C.
> It is necessary to wait for 5 minutes before applying the second coat.
APPLICATION
> Best results are obtained on asphalt surfaces.
> Application is not recommended on vacuum concrete surfaces, as adhesion will be low.
> Vehicles that spray paint with a special spray or airbrush.
> Brush or roller can also be used. However, it may not leave a film layer of desired thickness.
THINNING
> Maximum 5% road marking paint thinner should be used in brush or roller applications.
> It can be used by adding its own thinner up to 5% under normal conditions in airbrush application.
STORAGE
> It can be stored for one year in its unopened original packaging, in an environment of 5-35°C, out of direct sunlight.
> It should be protected from extreme temperature and humidity.