POLYURETHANE TOPCOAT PAINT
DEFINITION
> It is a polyurethane resin-based, two-component, top coat paint that gives glossy film, high UV resistance, cures with aliphatic isocyanate, has high chemical resistance, adhesion and high mechanical strength.
AREA OF USE
> It has been formulated to be used in prefabricated buildings, industrial facilities, metal constructions, on-vehicle equipment, in all areas where resistance to moisture and corrosion is required.
TECHNICIAL SPECIFICATIONS
Brightness |
Bright |
Solids by Volume |
50%+/- 5 |
Solids by Weight |
68 +/-1 |
Density(g/cm3) |
0.95-1.30 0.02 |
Theoretical Coverage |
10-12m2/kg in 40 mc dry film. (The amount of use may vary depending on the condition of the surfaces to be applied) |
Powder Drying |
30(20°C/min) |
Touch Dry |
40-50(20°C/minute) |
Full Curing |
8(20°C/min) |
Mixing ratio |
4 parts Polyurethane topcoat, 1 part Polyurethane topcoat hardener |
Application Thinner |
Dorepur Polyurethane Thinner |
Mixture Life |
12 hours |
SURFACE PREPARATION
> Before application, oil, dust, dirt, previously painted surfaces, paint residues etc. must be completely free of such substances.
> Before the application, the surface must be completely dry.
> Paint should be applied by adding hardener and thinner at the recommended mixing ratio to obtain a homogeneous mixture.
MIXTURE
> Before preparing the mixture, Dorepur topcoat (komp.A) is mixed thoroughly with a low-speed paint hand mixer.
> After the mixture becomes completely homogeneous, 4 volumes of Dorepur (comp.A) and 1 volume of Dorepur top coat hardener (komp.B) are mixed with a low speed paint hand mixer.
> It is thinned with Dorepur Thinner and made ready for use.
MIX LIFE
> It should be consumed within 6-8 hours at > 20°C.
> This time decreases as the temperature increases.
THINNING
> It can be thinned with Dorepur Polyurethane Thinner.
STORAGE
> Store in a cool place away from direct sunlight, in sealed packages. The mouth of the package should be kept closed when used.
> It can be stored for 1 year without opening the lid.