SILICONE ACRYLIC EXTERIOR PAINT
> Acrylic emulsion based exterior paint with silicone.
> Thanks to its silicon additive, it has high water repellent resistance, high water vapor permeability and allows moisture to escape.
> It is an exterior paint with high ability to cover easily, especially resistant to ultra violet rays, with high alkali and chemical resistance.
> It can be applied on all kinds of concrete, gas concrete, brick plaster and similar mineral surfaces, as well as on silicate or acrylic based paints that have lost their color.
> The surfaces to be newly painted should be cleaned from all kinds of oil, dirt and swollen layers and a surface should be created where the paint can hold.
> Priming the old painted surfaces with Feronia silicone-based exterior primer after the necessary ground preparation will provide a significant economy in paint consumption.
> Silicone Based Exterior Paint is diluted by maximum 15% and applied to the facade by brush, roller or spraying.
> The painting should be thinned with 15% water and applied in two coats at least 24 hours after the priming process. It is recommended to wait 12 hours between each paint job.
> Take care to keep the surface temperature between +5°C and +30°C during application.
> It is recommended to clean the tools and equipment used with water.
DRYING TIME (20°C):
> Touch Dry : 1-2 hours
> Second coat application: 10-12 hours
> Final Drying: 24 hours
(drying time may be longer with higher humidity and lower temperature)
> It can be stored for 2 years in its unopened package, in a cool and dry place, protected from direct sunlight.